Industrial applications which require germ-free compressed air are constantly increasing, also under extreme conditions. In addition to the high retention efficiency for bacteria, viruses and other micro-organisms, it is important to achieve high through flow rates at low pressure differences. Even with minimum filter work load, the separation performance must be ensured.
In sensitive areas such as the food industry, in dairies and breweries, but also in the chemical and pharmaceutical industries, CLEARPOINT sterile filters are a convincing solution: suitable for indirect food contact, usable up to 180 °C (356 °F) and especially durable due to the CLEARPOINT steam filters - each integrated in a high quality stainless steel housing.
The CLEARPOINT sterile filters fulfil all these requirements and are internationally approved for indirect food contact according to FDA CFR Title 21 and 1935/2004/EC. The high-quality flow-optimised stainless steel housing, in combination with the hydrophobic depth medium, ensures maximum process reliability. In order to ensure that the sterile filters remain sterile, they must be sterilised with saturated steam at regular intervals. BEKO TECHNOLOGIES hereby provides CLEARPOINT steam filters as a solution. The sintered stainless steel vapour filter elements utilise the same housing as the sterile filters.
Direct current sterilisation
The safest solution is DC sterilisation with saturated steam. The valves upstream and downstream of the sterile filter are closed and the screw plugs on the head and base of the sterile filter housing are unscrewed. Then the valve between the steam filter and the sterile filter is opened and the steam flows through the sterile filter, thereby killing off the bacteria. (Figure left).
In some cases it makes more sense to utilise counter-flow sterilisation.
The steam hereby flows from the pure side of the sterile filter through the filter housing. For example, when not only the sterile filter, but also the tank behind it should be sterilised.
Steam filters increase the service life of filters which have to be sterilised. Contamination such as particles or abrasion from valves and rust are safely and securely retained. Even resistant bacteria such as Bacillus Thermophilus are killed off completely in the sterile filter at 141 °C. The vapour filters in the 1μm version are additionally suitable for culinary steam and therefore also for direct food contact e.g. in the ultra-high heating of milk. The welded filter element end caps enable the user to decide whether the regeneration and cleaning of the vapour filter elements should be executed via reverse flushing or ultrasonic bath.
- All components comply with FDA CFR Title 21 & EC/1935/2004
- High quality stainless steel, suitable for food contact
- Connection for condensate drain off and venting valves
- Germ-free hygiene
- Complies with cGMP requirements
- High dirt retention capacities at low pressure differences
- Maximum separation performance, as at minimum work load
|Maximum pressure (bar) installation sizes 60-1920||16 bar|
|Maximum pressure (bar) installation size 2880||12 bar|
|Material||Hygienic high-quality stainless steel, polished outer surfaces|
|Connection for CLEARPOINT PIF filter housing with flange connection||DN10…DN80|
|Connection for CLEARPOINT PIT, PIW filter housing * with thread, welded-on end||G ¼…G3|
|Can be utilised up to 180 °C (356 °F)|
|Support cylinder and end caps made of stainless steel 1.4301|
|Separation rate ≥ 99.99998% based on ≤ 0.2μm|
|Suitable for DC and counter-flow sterilisation and VPHP|
|Integrity test according to HIMA|
|At least 100 sterilization cycles at 121°C and 30 min of steaming|
|Can be utilised up to 180 °C (356 °F)|
|Bursting pressure 10 bar (at 20 °C)|
|Degree of porosity> 50%|
|Double O-ring made of EPDM|
|Welded stainless steel end caps for maximum stability|
|Seamless filter pipe made of sintered stainless steel|
* Further technical data can be found in the product information below in the download area ...
You miss something here in the download area? We're here to help, just let us know: