METPOINT LKD hero

METPOINT® LKD: Fast and reliable leak detection

Are you aware that leakage drives up the energy costs in production? However, leaks often remain undetected for long periods, as one mostly cannot see or hear them. Such undetected leaks slowly become real cost drivers. Remedying leaks provides the highest savings potential in the field of compressed air supply. 

Small cause - large effect

Small cause - large effect. Even small leaks can make a big contribution to the costs for compressed air. In total, leakage rates of 30% are not uncommon. In times of rising energy prices, high sums of money therefore “go up in smoke” very quickly. The remedy here is the small and easy-to-use METPOINT LKDLeak Detector. If it is utilised, then the leaks in the system can be located in a short time. Maintenance is therefore targeted accurately and possible at short notice. The METPOINT LKD uses a physical characteristic for this purpose. As compressed air escapes, the gas molecules cause friction along the pipework wall. This friction in turn generates a noise in the ultrasonic frequency range.

The LKD leak detection device informs via color display, measured value and acoustic signal. Compact dimensions and easy operation make it quick and usable everywhere.

Functional principle

Leaks are points in the compressed air system where air can escape. As this results in a pressure drop, more energy is needed to keep the pressure in your system at the required level. Leaks generally occur in towards the end of production on pipework, connections, maintenance components as well as rapid-release couplings.

As compressed air escapes, the gas molecules cause friction along the piping wall. This friction in turn generates a noise in the ultrasonic frequency range. The METPOINT LKD detects this noise and converts it into audible and visual signals. As it only picks up noise within the gas leak frequency range, the device allows for accurate detection even in noisy environments.

Advantages of METPOINT® LKD

Technical data for METPOINT® LKD

Measuring range 40 kHz +/- 1 kHz
Bandwidth 2.5 kHz
Visual display OLED display, leak signal (digital dial display),
  Sensitivity: Bar graph and percentage display,
  Volume: Bar graph and percentage display,
  Charge status: Multi-stage
Signal strength display Digital dial display and percentage value
Power supply 3.7 V Li-ion accumulator, 1100 mAh
Charging time 2.5 h
Battery runtime > 40 h
Operating temperature –20 °C ... +60 °C

* Refer to downloads for additional performance data: Product Folder

Downloads METPOINT® LKD

Product Range
PDF
4 MB
Competence in Measurement
Brochure
PDF
317 KB
METPOINT LKD
Manual
PDF
412 KB
METPOINT LKD

Further sensors from the METPOINT® series:

METPOINT FLM
METPOINT FLM

Sensor technology for volume flow measurement.

Learn more...
METPOINT PRM
METPOINT PRM

The pressure transmitter METPOINT PRM records the relative pressure (overpressure) in gaseous and liquid media

Learn more...
METPOINT UD01|UD 02

Plug-on for direct information on site

Learn more...
METPOINT DPM SD23
METPOINT DPM

Sensor technology for precise pressure dew point measurement

Learn more...