You will receive a reliable source of compressed air quality with regular inspections and continuous maintenance. Prevent increased costs due to unexpected operational downtimes. Concluding a maintenance and service contract will ensure that your system is regularly inspected and tested by our experts, so that any potential problems are detected punctually. We can professionally execute repairs for compressed air components and calibration of compressed air measuring devices.
Concluding a service agreement guarantees you a response for remedying damage. After each service call-out, you receive a detailed report of all work performed on site. Furthermore, we can provide you with an extension to the statutory guarantee: Cover 3 More.
- Regular testing of your compressed air/compressed gas system
- Professional maintenance, repair and calibration
For us, it's safety first! It is a well-known fact that regular inspections and preventive maintenance are much more cost-effective than unscheduled repairs. Inspecting your compressed air processing and treatment ensures that you can achieve increased profitability by detecting damage at an early stage and remedying it. We provide inspection and maintenance by specialists.
Utilise our expertise for an inspection of your compressed air processing and treatment with the following focal points:
- Inspection for damage, fixing and completeness
- Inspection and adjustment of technical process-related parameters
- Inspection of components and electronics
Maintenance works are required to ensure that your compressed air station operates at maximum capacity as well as efficiency and economically during its entire service life. Depending on the manufacturer's specifications, this must be implemented at periodic intervals for the various components of your compressed air system
As specialists for high-performance compressed air technology, we are of course familiar with all your operating requirements and the statutory provisions. Our service staff will execute the inspection and maintenance on site using only original spare and wearing parts for BEKO TECHNOLOGIES products and systems and will create a detailed inspection protocol or a maintenance report.
Despite all precautionary measures and regular maintenance, unforeseen repairs can still be necessary. This therefore results in interruptions for working processes, the worst case scenario will be production shut down. In order to reduce production interruptions to a minimum, you need a specialist and product knowledgeable, fast repair.
Our skilled personnel can execute the majority of repairs already on site. For certain repairs, we need to bring your facility back to our workshop. In this case, only original BEKO TECHNOLOGIES spare and wearing parts are utilised.
Prior to any work, we will of course submit a detailed costs estimate. Following a successful repair, our service team will provide you with a detailed report covering all tasks performed and spare parts used.
Quality is the result of controlled processes. Measurement technology from BEKO TECHNOLOGIES provides the data basis for monitoring and evaluation of the relevant parameters of your compressed air.
In order to guarantee trouble-free and safe functionality for your technical measuring components, we recommend that they are regularly calibrated and adjusted periodically. This also includes cleaning the measuring devices, as continued use creates contamination that can affect the measurement results.
We will inspect and calibrate your measuring device with observance of and compliance with a certified quality assurance system according to the international quality standard DIN EN ISO 9001. Your measured values thereby comply with the demands of the quality assurance guidelines. The data collected in the process is of course also of great use for additional optimisation of your compressed air station.
BEKO TECHNOLOGIES provides comprehensive service agreements for customers who attach great importance to the efficiency and security of their investment and would like to calculate with fixed maintenance costs over a fixed, agreed period of time.
Our service agreements are tailor-made to your individual needs and requirements. BEKO TECHNOLOGIES GMBH undertakes to provide the required services for maintenance or malfunctions and supply wearing parts during the entire term of the contract. Responding for remedying damage rectification will be executed within 24 hours by one of our qualified service technicians.
Important components of the service agreements are:
- Inspecting and, if necessary, subsequent adjustment of functional and safety-relevant components
- Complete service documentation and compliance with accident prevention regulations
- Rapid response times via an extensive and well-stocked spare parts warehouse
- The contract term will be individually adapted to your requirement.
In addition to our standard 2 year warranty on all products, we can now offer you the option of extending the standard warranty even further with the Cover3More program - a low cost, all encompassing and simple warranty extension program.
Secure your product with minimal investment.
Extend the standard factory warranty for an additional 3 years. It can be purchased up to 30 days after the original purchase date. No hassle and easy to calculate without any hidden costs. This is applicable to all product lines.
The Cover3More extended warranty program from BEKO TECHNOLOGIES ensures that your investment is covered for a total of 5 years at the nominal cost of an extra 8% to your list purchase price.
2 year standard warranty covers parts and labour
3 year extended warranty covers parts only, no part restrictions
This significantly reduces your risk of having unexpected costs
Reliability you can count on
With the Cover3More extended warranty program, BEKO TECHNOLOGIES not only lengthens the standard warranty period by 3 years from the purchase date, but also draws on the company's vast compressed air industry experience to quickly resolve any product problems you may experience in the least disruptive way possible, thereby keeping downtime to an absolute minimum. Should a repair be required, it will be handled by qualified, authorised personnel and only original parts will be used.
BEKO TECHNOLOGIES has been awarded accreditation from Safecontractor for its commitment to achieving excellence in health and safety. Safecontractor is a leading third party accreditation scheme which recognises very high standards in health and safety management amongst UK contractors. The company’s application for Safecontractor accreditation was driven by the need for a uniform standard across the business.
Safecontractor is applicable to most sectors although it is particularly relevant to food manufacture, property, facilities management, retail and leisure sectors, all of which are big users of contracted services. Under the Safecontractor scheme, businesses undergo a vetting process which examines health and safety procedures and their track record for safe practice. Those companies meeting the high standard are included on a database, which is accessible to registered users only via a website.
Client-organisations who sign up to the scheme can access the database, enabling them to vet potential contractors before they even set foot on site. These clients agree that, as users of the scheme, they will engage only those who have received accreditation. Over 210 major, nation-wide businesses, from several key sectors, have signed up to use the scheme when selecting contractors for services such as building, cleaning, maintenance, refurbishment or electrical and mechanical work
All BEKO TECHNOLOGIES UK service personnel have been successful in gaining the full qualifications for the safe handling of refrigerants J11-F Gas Cat1.
From July 1st 2011 companies must use only qualified personnel for installation, commissioning, service or other refrigerant handling activities in the use of HFC or HCFC refrigerants.
The qualifications include leak testing and rectification, storage for recycling or reclamation and system record keeping. This means that systems using refrigeration (F gases) then by law companies must use a technician with the above qualification to handle, leak test and store the gases.