Do you not want to make any compromises in your production with regard to compressed air quality? Do you want to make sure at all times that the compressed air complies with ISO class 1 or better, i.e. that it contains no oil or germs? Then the TÜV-certified and by neutral institutes validated catalytic converter BEKOKAT is an interesting solution.
In highly sensitive applications, conventional compressed air preparation has technical and economic limits when it comes to particularly high requirements on the residual oil content of the compressed air. The catalytic converter BEKOKAT sets new standards in this respect by completely converting hydrocarbons into carbon dioxide and water through total oxidation on the catalyst. The process thus consistently produces oil-free compressed air with a maximum residual oil content of hardly measurable 0.003 milligrams per cubic meter. With this performance, the BEKOKAT units exceed the residual oil content of 0.01 mg/m³ specified in Class 1. In other words, a quality that is required in particularly demanding production processes, e.g. in the food, pharmaceutical, automotive and electronics industries.
Can be retrofitted in existing plants
The BEKOKAT unit is installed as a stand-alone solution behind the compressors or on the consumption point installed.
BEKOKAT makes achievable constantly oil-free compressed air with a maximum residual oil content of a barely measurable 0.001 mg/m³ of compressed air. A quality level which is required in particularly demanding production processes.
On our YouTube channel you will find more videos about our company, compressed air preparation and measuring technology.
The intake air for compressed air generation is usually contaminated with hydrocarbons. Even with oil-free compressed air generation, a treatment solution is therefore required. The catalytic converter BEKOKAT reliably cleans the compressed air and thus constantly provides oil-free compressed air better than class 1 according to ISO 8573-1. The catalytic compressed air treatment breaks down all hydrocarbons in the compressed air into carbon dioxide and water. Due to process temperatures above 150°C, the escaping compressed air behind the BEKOKAT is free of germs, bacteria and viruses.
Independent of ambient temperature, air humidity and oil input concentration
The effectiveness of the catalytic converter BEKOKAT was certified by TÜV and validated by neutral institutes
In a second series of tests with the Gesellschaft für Produktionshygiene und Sterilitätssicherung mbH (GfPS) it was confirmed that compressed air contaminated with bacteria is treated aseptically in the BEKOKAT. After treatment, no living bacteria could be detected in the compressed air flow.
Safe partial load operation between 20 % - 100 %
The highly efficient air-to-air heat exchanger in BEKOKAT keeps the average power consumption at a very low level. Even in partial load operation of up to 20 %, the catalyst technology of the BEKOKAT unfolds its effectiveness without restrictions. The enormous service life of the special catalyst granulate is also extremely advantageous from an economic point of view.
Highest process reliability through continuous process monitoring
In addition to cost efficiency, a high degree of process reliability is also required. On the one hand, the intelligent control system monitors all relevant parameters of the plant. If, in the event of an accident, so much oil should enter that the compressed air can no longer be reliably treated, precision valves close and prevent any oil spillage.
Flexible installation in central processing or at the terminal
The BEKOKAT is extremely flexible in its installation. It can be installed centrally in the compressed air station and thus treat 100 % of the generated compressed air oil-free, or it can be installed in partial lines or in direct proximity to the compressed air consumer in order to treat directly only the compressed air flow that is required oil-free.
By connecting several BEKOKAT in parallel, high capacities can be achieved on the one hand, and on the other hand, by-pass circuits can be implemented, e.g. for maintenance purposes,to ensure a continuous supply of conditioned compressed air.
With the BEKOKAT CC-018, the concept that has been proven for decades has now been implemented in a very compact design. This makes it possible to provide oil-free compressed air of Class 1 or better economically, even in the laboratory, directly at laser applications or for treating sensitive part air flow e.g. for breathing air supplies in painting cabins. The integrated control reliably ensures that the compressed air quality required is met at all times.
|Volume flow rate* (m³/h)||18||60||120||180||360||720||1200|
|Max. operating pressure [g]||11||16||16||16||16||16||11|
|Power supply||230 V, 50 Hz, 1 Ph||230 VAC, 50 Hz, 1 Ph, PE||400 VAC, 50 Hz, 3 Ph, PE||400 VAC, 50 Hz, 3 Ph, PE||400 VAC, 50 Hz, 3 Ph, PE||400 VAC, 50 Hz, 3 Ph, PE||400 VAC, 50 Hz, 3 Ph, PE|
|Install. Performance (kW)||0.58||1||1.64||2.64||5.14||8.74||13.84|
|Average Performance (kW)||0.20||0.52||0.86||1.33||2.17||3.26||3.75|
The technical data are given for an operating pressure of 7 bar [g]. Pressures deviating from this are simply possible. We will be pleased to design a system individually for your application. Talk to us.
The installed power is mainly required in the heat-up phase after switching on the BEKOKAT. The BEKOKAT works economically and efficiently during operation due to the integrated heat exchanger with low energy consumption.
* By connecting several BEKOKAT systems in parallel, respective higher volume flows can be processed.