This page is also available in English - Americas

Change now
BEKOTECHNOLOGIESInternational Corporate SiteBEKOTECHNOLOGIESDeutschland | Österreich | SchweizBEKOTECHNOLOGIESIndiaBEKOTECHNOLOGIESBrazilBEKOTECHNOLOGIES責任を通じより良くBEKOTECHNOLOGIES責任心是我們成長的動力BEKOTECHNOLOGIESIreland | United KingdomBEKOTECHNOLOGIESFranceBEKOTECHNOLOGIESBelgique | Pays-Bas | LuxembourgBEKOTECHNOLOGIESItaliaBEKOTECHNOLOGIESSpainBEKOTECHNOLOGIESPolandBEKOTECHNOLOGIESCzech RepublicBEKOTECHNOLOGIESNetherlandsBEKOTECHNOLOGIESCanadaBEKOTECHNOLOGIESUnited States of AmericaBEKOTECHNOLOGIESAmérica Latina
The Original since 1982

BEKOMAT NEW

Reliable, energy saving and efficient Robust and versatile Quality made in Germany

Inquire now
Reliable since 1982

The electronically level-controlled condensate drain

Where there is compressed air, there is condensate. It usually contains oil, is contaminated with dirt particles and spreads throughout the compressed air network. The removal of condensate is therefore one of the key purposes of compressed air treatment. We help you to remove condensate from the compressed air and to achieve the optimum quality for your application: with the BEKOMAT. And we are the specialists – as the millions of BEKOMAT condensate drains are in operation worldwide demonstrate. BEKOMAT the first electronically level-controlled condensate drain and a synonym for expert condensate drainage.

Versatile BEKOMAT

Our condensate drain rages

BEKOMAT 12 | 13 | 14 | 16

During compressed air generation and processing, the optimum quality for the application should be achieved. It is important to remove contaminants and humidity from the compressed air as these can lead to quality problems, failures or loss of production.


BEKOMAT ® 31U | 32U | 33U | 33U CO

During compressed air generation and processing, the optimum quality for the application should be achieved. It is important to remove contaminants and humidity from the compressed air as 
these can lead to quality problems, failures or loss of production.


BEKOMAT 20 | 20FM

The BEKOMAT 20 FM with integrated filter management (filter status time display and filter status control) is a cost-effective monitoring solution for the connected filter element. It is designed as a robust condensate drain for water separators, filters or similar applications and can be used both in systems with oil-lubricated as well as with oil-free compressors.


BEKOMAT 03 | 06 | 08 | 09 | 15 | 16

The BEKOMAT® is an electronically level-controlled condensate drain used for draining off condensate in compressed gas systems. The condensate formed is collected in the BEKOMAT® and the filling level is monitored by an integrated capacitive sensor. When the defined filling level is reached, the condensate is discharged via a pilot-controlled solenoid valve.


BEKOMAT 32iU | 33iU | 12i | 13i | 14i | 16i

The BEKOMAT i4.0 product range fulfils the expectations placed on IIoT-capable systems: Networkability, remote monitoring, flexibility and, above all, geared to the future.


The right BEKOMAT for your application

Selection of standard BEKOMAT versions

Filter BEKOMAT-Version

Pressure in bars

or

Volume in m³/min

63 bar(A) max.50 bar(A) max.40 bar(A) max.25 bar(A) max.16 bar(A) max.Max. pressure0,8/1,2 bar(A) max.BM12*BM13*BM14*BM16COBM33UBM32UBM20BM31U2,5 m³/min4 m³/min5 m³/min10 m³/min6,5 m³/min30 m³/min130 m³/minUp to 1400 m³/minStandard aluminum housing only up to 16 bar*Up to 16 bar optionally also as CO hard-coated> 16 bar always COWith check valve on requestFlow rate

The climate affects the amount of condensate produced. For an optimum design, we therefore recommend that the respective climate zones are considered during selection. The performance data for the blue zone (Central and Southern Europe, Central America) are shown here.

Video

How does the condensate drain work?

The BEKOMAT® is an electronically level-controlled condensate drain used for draining off condensate in compressed gas systems. The condensate formed is collected in the BEKOMAT® and the filling level is monitored by an integrated capacitive sensor. When the defined filling level is reached, the condensate is discharged via a pilot-controlled solenoid valve. When the defined filling level is reached, only the condensate is automatically discharged without losing valuable compressed air.

Inquire now

The revolutionary BEKOMAT

Good reasons for the BEKOMAT condensate drain

Economical

Condensate drain without pressure loss

Benefits
If a float drain leaks, then high costs arise as a result of leaks. Time-controlled solenoid valves also cause compressed air losses. During the valve opening, expensively generated compressed unused compressed air escapes into the environment. In contrast a level-controlled condensate drain guarantees discharge without any compressed air loss i.e. also energy loss. This not only saves energy and costs, but also CO2 emissions.

Robust

The standard design is made in corrosion-resistant aluminium, which makes the BEKOMAT particularly reliable and robust. A silver-coloured coating protects the outside of the housing. The BEKOMAT CO models are predestined for operating with oil-free or aggressive condensates. Their housing is additionally, completely glass bead blasted and protected by a high-quality hard coating.

Quick

Condensate drains with service concept – quick and service-friendly

The innovative design of the BEKOMAT 31U, 32U, 33U and 33U CO  series enables simplified handling as well as installation and maintenance with minimum time expenditure. The BEKOMAT consist of no more than three units joined together with quick-release connectors. The electronic control and sensor units are only installed once, only the service unit (including all wear and pressure parts) needs to be exchanged for maintenance purposes. This robust condensate drain is suitable for both oil-contaminated and oil-free, condensates.

Special

Condensate drains for special requirements

Based on our decades of experience, we have developed and implemented numerous additional functions for special requirements for our customers in a wide variety of industries, following on from on the classic advantages of the BEKOMAT. These have proved themselves in a wide variety of application areas - you can also now benefit from our unique know-how.

BEKOMAT is awesome!

Product Manager, Condensate Technology

Condensation occurs everywhere

Where is your BEKOMAT condensate drain located?

Compressor

Oil-free compressors often produce very acidic condensates. Hard-coated BEKOMAT condensate drains have a special coating and are ideally suited for this purpose.

BEKOMAT solutions are also available for multi-stage compressors and turbo compressors, also for special requirements according to your installation.

Aftercooler/ Water separator

The highest condensate volume is generated at the water-separator. The level-controlled BEKOMAT condensate drain reliably ensures safe discharge according to the condensate level.

Our extensive range offers you the right solution for a wide variety of condensate volumes and pressures - and even for explosion-proof environments if required.

Storage tank

Large particles in the form of rust, for example, are present in air vessels. No problem for our BEKOMAT condensate drain: thanks to its large outlet cross-section, it is particularly insensitive to dirt and hardly susceptible to blockages.

And if something prevents the BEKOMAT from draining, it tries to self-clear itself before an alarm is triggered.

Filters

Condensate builds up in systems in a short period of time which can cause a variety of problems including poor system efficiency, corrosion as well as excessive wear and tear on surrounding equipment.

Our BEKOMAT Filter-Management drains and other larger BEKOMAT versions are available for the safe and reliable draining of condensate from your filters.

Dryer

Only a small amount of condensate should reach the refrigeration dryer, but condensate still accumulates in the aftercoolers.

A correctly sized BEKOMAT condensate drain at each collection point, reliably and safely discharges the condensate.

Comparison of products

Compare models with each other

Technical data
max. compressor capacity
max. dryer performance
max. filter performance
Housing
min./max. operating pressure
Operating temperature
Condensate inlet
Condensate discharge
Condensate type
Ø Discharge capacity at 7 bar(g)
BEKOMAT 31UBEKOMAT 31U
2,5 m²/min
5 m²/min
25 m²/min
Aluminium + plastic, glass fibre reinforced
0,8 ... 16 bar (g)
+1 °C … +70 °C
1 x G½ (inside)
1 x G¼; hose connector
oil-contaminated & oil-free condensate
0,63 l/h
BEKOMAT 32UBEKOMAT 32U
5 m²/min
10 m²/min
50 m²/min
Aluminium + plastic, glass fibre reinforced
0,8 ... 16 bar (g)
+1 °C … +70 °C
1 x G½ (inside)
1 x G¼; hose connector
oil-contaminated & oil-free condensate
1,14 l/h
BEKOMAT 33UBEKOMAT 33U
10 m²/min
20 m²/min
100 m²/min
Aluminium + plastic, glass fibre reinforced
0,8 ... 16 bar (g)
+1 °C … +70 °C
3 x G½ (inside)
1 x G½; hose connector
oil-contaminated condensate
3,8 l/h
BEKOMAT 33U COBEKOMAT 33U CO
10 m²/min
20 m²/min
100 m²/min
Aluminium, hard-coated + plastic, glass fibre reinforced
0,8 ... 16 bar (g)
+1 °C … +70 °C
3 x G½ (inside)
1 x G½; hose connector
oil-contaminated & oil-free condensate
3,8 l/h
BEKOMAT 12BEKOMAT 12
6,5 m²/min
13 m²/min
65 m²/min
Aluminium
0,8 ... 16 bar (g)
+1 °C … +60 °C
1 x G½ (inside)
1 x G⅜ (outside); hose connector
oil-contaminated condensate
1,43 l/h
BEKOMAT 12 COBEKOMAT 12 CO
6,5 m²/min
13 m²/min
65 m²/min
Aluminium, hard-coated
0,8 ... 16 bar (g)
+1 °C … +60 °C
1 x G½ (inside)
1 x G⅜ (outside); hose connector
oil-contaminated & oil-free condensate
1,43 l/h
BEKOMAT 12 CO PN63BEKOMAT 12 CO PN63
6,5 m²/min
13 m²/min
65 m²/min
Aluminium, hard-coated
1,2 ... 63 bar (g)
+1 °C … +60 °C
1 x G½ (inside)
1 x G⅜ (inside); hose connector
oil-contaminated & oil-free condensate
1,43 l/h
BEKOMAT 13BEKOMAT 13
30 m²/min
60 m²/min
300 m²/min
Aluminium
0,8 ... 16 bar (g)
+1 °C … +60 °C
2 x G½ (inside)
1 x G½ (outside); hose connector
oil-contaminated condensate
7,61 l/h
BEKOMAT 13 COBEKOMAT 13 CO
30 m²/min
60 m²/min
300 m²/min
Aluminium, hard-coated
0,8 ... 16 bar (g)
+1 °C … +60 °C
2 x G½ (inside)
1 x G½ (outside); hose connector
oil-contaminated & oil-free condensate
7,61 l/h
BEKOMAT 13 CO PN25BEKOMAT 13 CO PN25
30 m²/min
60 m²/min
300 m²/min
Aluminium, hard-coated
1,2 ... 25 bar (g)
+1 °C … +60 °C
2 x G½ (inside)
1 x G⅜ (inside); hose connector
oil-contaminated & oil-free condensate
7,61 l/h
BEKOMAT 13 CO PN40BEKOMAT 13 CO PN40
30 m²/min
60 m²/min
300 m²/min
Aluminium, hard-coated
1,2 ... 40 bar (g)
+1 °C … +60 °C
2 x G½ (inside)
1 x G⅜ (inside); hose connector
oil-contaminated & oil-free condensate
7,61 l/h
BEKOMAT 13 CO PN50BEKOMAT 13 CO PN50
30 m²/min
60 m²/min
300 m²/min
Aluminium, hard-coated
1,2 ... 50 bar (g)
+1 °C … +60 °C
2 x G½ (inside)
1 x G⅜ (inside); hose connector
oil-contaminated & oil-free condensate
7,61 l/h
BEKOMAT 14BEKOMAT 14
130 m²/min
260 m²/min
1300 m²/min
Aluminium
0,8 ... 16 bar (g)
+1 °C … +60 °C
3 x G¾ (inside)
1 x G½ (outside); hose connector
oil-contaminated condensate
33,33 l/h
BEKOMAT 14 COBEKOMAT 14 CO
130 m²/min
260 m²/min
1300 m²/min
Aluminium, hard-coated
0,8 ... 16 bar (g)
+1 °C … +60 °C
3 x G¾ (inside)
1 x G½ (outside); hose connector
oil-contaminated & oil-free condensate
33,33 l/h
BEKOMAT 14 CO PN25BEKOMAT 14 CO PN25
130 m²/min
260 m²/min
1300 m²/min
Aluminium, hard-coated
1,2 ... 25 bar (g)
+1 °C … +60 °C
3 x G¾ (inside)
1 x G⅜ (inside); without hose connector
oil-contaminated & oil-free condensate
33,33 l/h
BEKOMAT 16 COBEKOMAT 16 CO
1400 m²/min
2800 m²/min
--
Aluminium, hard-coated
0,8 ... 16 bar (g)
+1 °C … +60 °C
2 x G¾ (internal thread), 1 x G1 (internal thread)
1 x G½ (inside)
oil-contaminated & oil-free condensate
274 l/h
BEKOMAT 20BEKOMAT 20
4 m²/min
8 m²/min
40 m²/min
Aluminium and plastic, glass fibre reinforced
0,8 ... 16 bar (g)
+1 °C … +60 °C
1 x G¾ (outside) - G½ (inside)
1 x G¼; hose connector
oil-contaminated & oil-free condensate
1,03 l/h
BEKOMAT 20 FMBEKOMAT 20 FM
4 m²/min
8 m²/min
40 m²/min
Aluminium and plastic, glass fibre reinforced
0,8 ... 16 bar (g)
+1 °C … +60 °C
1 x G¾ (outside) - G½ (inside)
1 x G¼; hose connector
oil-contaminated & oil-free condensate
1,03 l/h
BEKOMAT 03 E PN25BEKOMAT 03 E PN25
100 m²/min
200 m²/min
--
Stainless steel (1.4581)
2 ... 25 bar (g)
+1 °C … +60 °C
3 x G¾ (inside)
1 x G½ (inside)
oil-contaminated, oil-free & aggressive condensate
56 l/h
BEKOMAT 03 E PN63BEKOMAT 03 E PN63
100 m²/min
200 m²/min
--
Stainless steel (1.4581)
2 ... 63 bar (g)
+1 °C … +60 °C
3 x G¾ (inside)
1 x G½ (inside)
oil-contaminated, oil-free & aggressive condensate
56 l/h
BEKOMAT 06 E PN25BEKOMAT 06 E PN25
1000 m²/min
2000 m²/min
--
Stainless steel (1.4581)
2 ... 25 bar (g)
+1 °C … +60 °C
2 x G¾ (inside), 1 x G1 (inside)
1 x G½ (inside)
oil-contaminated, oil-free & aggressive condensate
oil-contaminated, oil-free & aggressive condensate
BEKOMAT 03 CO LABEKOMAT 03 CO LA
100 m²/min
200 m²/min
--
Aluminium, hard-coated
0 … 1,2 / 1,2 ... 25 bar (g)
+1 °C … +60 °C
3 x G¾ (inside)
1 x G½ (inside)
oil-contaminated & oil-free condensate
49 l/h
BEKOMAT 06 CO LABEKOMAT 06 CO LA
1000 m²/min
2000 m²/min
--
Aluminium, hard-coated
0 … 1,2 / 1,2 ... 16 bar (ü)
+1 °C … +60 °C
2 x G¾ (inside), 1 x G1 (inside)
1 x G½ (innen)
oil-contaminated & oil-free condensate
251 l/h
BEKOMAT 03 CO LALPBEKOMAT 03 CO LALP
100 m²/min
200 m²/min
--
Aluminium, hard-coated
0 … 0,4 / 0,4 ... 16 bar (g)
+1 °C … +60 °C
3 x G¾ (inside)
1 x G½ (inside)
oil-contaminated & oil-free condensate
27,3 l/h
BEKOMAT 06 CO LALPBEKOMAT 06 CO LALP
1000 m²/min
2000 m²/min
--
Aluminium, hard-coated
0 … 0,4 / 0,4 ... 16 bar (g)
+1 °C … +60 °C
2 x G¾ (inside), 1 x G1 (inside)
1 x G½ (inside)
oil-contaminated & oil-free condensate
oil-contaminated & oil-free condensate
BEKOMAT 15 CO VACUBEKOMAT 15 CO VACU
100 m²/min
200 m²/min
--
Aluminium, hard-coated
0,1 ... 0,8 bar (abs)
+1 °C … +60 °C
1 x G¾ (inside)
1 x G½ (inside)
oil-contaminated & oil-free condensate
42 l/h
BEKOMAT 16 CO VACUBEKOMAT 16 CO VACU
1000 m²/min
2000 m²/min
--
Aluminium, hard-coated
0,1 ... 0,8 bar (abs)
+1 °C … +60 °C
1 x G¾ (inside)
1 x G½ (inside)
oil-contaminated & oil-free condensate
194 l/h
BEKOMAT 08BEKOMAT 08
9.360 - 14.400
--
--
Stainless steel (1.4541)
0,5 ... 10 bar (g)
+1 °C … +60 °C
Flange 2"; C50 X 60,3; DIN 1092-1
1 x G1 (inside)
oil-contaminated, oil-free & aggressive condensate
1505 l/h
BEKOMAT 09BEKOMAT 09
24.000 - 30.000
--
--
Stainless steel (1.4541)
0,5 ... 4 (g)
+1 °C … +60 °C
Flange 2"; C50 X 60,3; DIN 1092-1
1 x G1 (inside)
oil-contaminated, oil-free & aggressive condensate
3425 l/h
Downloads

Brochure

BEKOMAT 12 | 13 | 14 | 16
Brochure
560 KB
BEKOMAT 20 | 20 FM
Brochure
391 KB
BEKOMAT 31U | 32U | 33U | 33U CO
Brochure
368 KB
BEKOMAT Special Solutions
Brochure
785 KB

Manual

BEKOMAT 12| 12 CO | 12 CO PN63
Manual
9 MB
BEKOMAT 13 | 13 CO | 13 CO PN25 |13 CO PN40
Manual
12 MB
BEKOMAT 14 | 14 CO |14 CO PN25
Manual
12 MB
BEKOMAT 16 CO
Manual
10 MB
BEKOMAT 20 / 20 FM
Manual
7 MB
BEKOMAT 8 | 9
Manual
4 MB
Operating manual Service-Unit BEKOMAT 31U / 31U F
Manual
470 KB
Operating manual BEKOMAT 31U
Manual
886 KB
Operating manual Service-Unit BEKOMAT 32U / 32U F
Manual
403 KB
Operating manual BEKOMAT 32U
Manual
974 KB
Operating manual Service-Unit BEKOMAT 33 ... 33U CO F
Manual
552 KB
Operating manual BEKOMAT 33U
Manual
1 MB

Contact

Please select your country for faster respond